Configuring Comm Ports
The Ports tab allows editing of the following parameters for each communication port.
The DDNG-KNX has two ports:
-
Comm port 1 DyNet
-
Comm port 2 KNX
| Advanced properties are out of scope and not included here. These values should not be changed unless advised by Dynalite. |
| Property | Description |
|---|---|
Port type |
DyNet or KNX |
Baudrate |
The default is 9600. For DyNet the baud rate range is 600-115200. |
Delay (milliseconds) |
Time to delay DyNet messages (DyNet port only, default 20ms). |
Retry delay (milliseconds) |
Time to delay before retrying DyNet messages (DyNet port only, default 60ms). |
Area zero transmit |
Enables all-areas messages for diagnostic use. Leave this option Disabled unless advised by Dynalite. |
Sign on at startup |
Sends a sign on message at startup (Default Enabled). |