Commands
indicates whether the command pairing is Valid or Invalid
The following commands are available:
|
|
|
Command Functions
Actual Light Level
Physical messages to Set/Request/Reply-to the actual light level of physical channels.
| Property | Description |
|---|---|
Device Code |
DyNet device type. Two byte hex code. |
Box Number |
DyNet physical device address (0-255) |
Actual Temperature Logical
Logical messages to Set/Request/Reply-to the actual temperature.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
Actual Temperature Physical
Physical messages to Set/Request/Reply-to the actual temperature of physical channels.
| Property | Description |
|---|---|
Device Code |
DyNet device type. Two byte hex code. |
Box Number |
DyNet physical device address (0-255) |
Channel Runtime
Physical messages to Request/Report the physical channel runtime in hours.
| Property | Description |
|---|---|
Device Code |
DyNet device type. Two byte hex code. |
Box Number |
DyNet physical device address (0-255) |
Channel |
The affected channel. |
Current Channel Level
Logical messages to Set/Request the percentage output for a specified channel.
| Property | Description |
|---|---|
Fade (rounded to 10 ms) |
Fade time in milliseconds (default: 2s) |
Logical Area |
The affected area |
Channel |
Select the channel number or use All Channels (0). |
Current Preset
Logical messages to Request/Recall preset scenes.
| Property | Description |
|---|---|
Fade (rounded to 10 ms) |
Fade time in milliseconds (default: 2s) |
Logical Area |
The affected area. |
Channel |
The affected channels. Use the channel number or use All Channels (0). |
Date
Physical messages to Set/Request/Reply-to the date.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Date Time
Physical messages to Set/Request/Reply-to the date and time.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
Physical DyNet address |
Event Control
Physical messages to Enable/Disable remote/local event or to Trigger remote/local event.
| Property | Description |
|---|---|
Control type |
Enable Disable, Trigger an event. |
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Humidity
Physical messages to Request/Reply-to humidity value.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Light Control (open/closed loop)
Logical messages to Enable/Disable daylight regulation.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
The affected channel. Use the channel number or use All Channels (0).
Light Level Setpoint
Logical messages to Set/Request/Reply-to the light control setpoint.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
Load Current
Physical messages to Request/Calibrate/Report-on the load current of physical channels.
If channel number for Request is 0xCC it will be used to calibrate current to 0 (translates to write to group address)
| Property | Description |
|---|---|
Device Code |
DyNet device type. Two byte hex code. |
Box Number |
DyNet physical device address (0-255) |
Channel |
The affected channel. |
Motion
Logical messages to Enable/Disable motion control.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
Channel |
The affected channel. Use the channel number or use All Channels (0). |
No motion timeout
Physical messages to Set/Request/Reply-to the no-motion timeout period.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Nudge
Logical messages to incrementally change a channel level value.
| Property | Description |
|---|---|
Fade (rounded to 10 ms) |
Fade time in milliseconds (default: 2s) |
Logical Area |
The affected area. |
Channel |
The affected channel. Use the channel number or use All Channels (0). |
Panel enable/disable
Logical messages to Enable/Disable user interfaces.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
Panic
Logical messages to recall Panic/Un-Panic Presets. If true, recalls the panic system preset in the load controllers and disables buttons on user interfaces. If false, the panic function recalls the previous preset in the load controllers and enables buttons on user interfaces.
| Property | Description |
|---|---|
Fade (rounded to 10 ms) |
00:00:00:010 (hh:mm:ss:fff). 2 second default. |
Logical Area |
Set the affected area. |
Power
Physical messages to Request /Report-on the power consumption of physical channels.
| Property | Description |
|---|---|
Device Code |
DyNet device type. Two byte hex code. |
Box Number |
DyNet physical device address (0-255) |
Channel |
The affected channel. |
Pressure
Physical messages to Set/Request/Reply-to the air pressure value.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Ramp or stop fade
Logical messages to ramp channel levels. Pressing and holding a button gradually increases or decreases channel levels. Releasing the button stops the channels at their present level.
| Property | Description |
|---|---|
Ramp rate (rounded to 10 ms) |
Time period to change from 0 to 100%. 00:00:00:010 (hh:mm:ss:fff). |
Logical Area |
The affected area. |
Channel |
The affected channel. Use the channel number or use All Channels (0). |
Speed
Physical messages to Request/Reply-to the wind speed value.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Task control
Physical messages to control a task in the specified device.
| Property | Description |
|---|---|
Control Type |
Pause Resume, Pause task, Start Stop, Start task, Stop task. |
Task number |
The task number to be controlled. |
Device code |
Device name and one-Byte code. Select from dropdown list. |
Box Number |
DyNet physical device address (0-255) |
Temperature Setpoint Logical
Logical messages to Set/Request/Reply-to the temperature setpoint.
| Property | Description |
|---|---|
Logical Area |
The affected area. |
Temperature Setpoint Physical
Physical messages to Set/Request/Reply-to the temperature setpoint.
| Property | Description |
|---|---|
Device code |
Device name and one-byte code. Select from dropdown list. |
Box Number |
Physical DyNet address |