Building Connectivity Devices

PDDEG-S

System Manager uses gateway devices as building blocks for each floor.

Ethernet Gateway Supervisor (per floor or per group of rooms)

Secure multipurpose Ethernet connection between the control system and head-end software. It provides timeclock and scheduling functions as well as gateway services between Ethernet and DyNet devices.

DYN INT PDDEG S BVA 800PX
Philips Dynalite also offers a range of integration gateways for BACnet, KNX, CoolMaster, Somfy, Modbus, and other Ethernet, RS-232, and RS-485 based systems.

DDRC-GRMS-E

This room controller is ideally suited to hotels looking for guestroom automation to help achieve greater energy efficiency and outstanding guest experiences by providing industry-leading control solutions.

The DDRC-GRMS-E is a compact DIN rail multi-protocol switching room controller suitable for field installation into each guestroom. The controller is a self-contained unit with internal power supply, relays, and processor. It is a network device able to communicate over Ethernet and RS-485 with software and other devices. It enables switching of multiple lighting groups, HVAC, power outlets, and blinds using third-party or Philips Dynalite user interfaces. It provides up to 300 mA @ 12 VDC to the DyNet bus.

DYN INT DDRC GRMS E BVA 791PX

The DDRC-GRMS-E includes the following features:

  • 2 x power channels (GPO and HVAC)

    • Channel 1 is intended for driving the room’s general-purpose outlets for standby power management.

    • Channel 2 controls HVAC or other power switching.

    • Each output is limited to 16 Amps, and can drive external contactors if high switching capacity is required.

  • 7 x lighting channels

    • Channels 3-9 are intended for switched lighting circuits.

    • Each output channel is individually rated up to 4 Amps.

    • Each channel group (3-5 and 6-9) has a separate supply with a max shared current of 6 Amps total per group.

  • 2 x single-throw and 2 x double-throw blind motor control relays

    • Channels 10, 11a, 11b and 12, 13a, 13b provide directional motor control for blind/curtain integration.

  • 64-channel DMX output

    • Adds color and dimming control for light shows.

  • UL924 input

    • Integrates seamlessly with compatible emergency systems.

  • 18 x dry contact inputs

    • Available for third-party user interfaces (as an alternative to Dynalite network user interfaces).

    • Can be used with other dry contact room inputs such as door and window switches.

  • 4 x 12 V digital outputs

    • Designed to drive room status indicator LEDs in common cathode configuration and trigger additional devices such as doorbells.

  • 1 x RS-485 DyNet port

    • The DyNet port enables network communication and power between the controller and room devices.

    • The DyNet spur is isolated from the floor network, eliminating interruptions to in-room system operation.

  • Ethernet port

    • Connecting directly to a site’s Ethernet LAN, the device can securely pass network messages and report its status.

  • Unique LAN addressing

    • Two banks of DIP switches allow the installer to manually set the controller’s network identification, box number, and a logical/physical address offset for the devices in the room.