Add PDZG-E Wireless Gateway

  1. Connect the PDZG-E to the same LAN as the PDDEG-S and ensure that it is powered on.
    The PDZG-E takes approximately 1-2 minutes to boot up and connect to the network.

  2. In System view, click sb icon insert device from network Insert Device from Network (Ctrl+L).

  3. In the Insert Devices from Network window, click sb icon discover network Discover Network > Discover Devices over Ethernet. All discovered devices are listed.

    sb discover over ethernet

  4. Tick the sb icon checkbox tick PDZG-E checkbox and click sb icon add Add Devices.

    sb insert devices from network pdzg e

  5. Close the window to return SB.

  6. In the System tree, click and drag the PDZG-E onto the PDDEG-S. The places it under the PDDEG-S in the network hierarchy. If prompted, click Yes to confirm.

    sb system view drag pdzg e